All Star 2 HP Single Phase Regenerative Air Blower, 105 SCFM, 1.5" Inlet & Outlet

Product Description

The All Star 2 HP Single Phase Regenerative Air Blower is an industrial air movement unit designed for applications requiring a supplier-listed airflow capacity of 105 SCFM. Powered by a 2 HP single-phase motor, this blower features 1.5-inch inlet and outlet connections for integration into compatible industrial air systems.

The unit has overall dimensions of 16 inches in length, 16 inches in width, and 16 inches in height. Its single-phase electrical configuration is listed for 50 Hz and 60 Hz operation at 230 V, subject to confirmation of the correct electrical supply requirements.

The supplier also lists maximum working water pressure and maximum vacuum water pressure values. These figures are reproduced as supplied; their units and test conditions should be confirmed before they are used for equipment selection or system design.

Key Features

• 2 HP motor
• Single-phase electrical configuration
• Supplier-listed airflow capacity of 105 SCFM
• 1.5-inch inlet and outlet connections
• 230 V electrical configuration listed for 50 Hz and 60 Hz
• 16" L × 16" W × 16" H overall dimensions
• Regenerative blower design

Specifications

• Product Type: Regenerative Air Blower
• Horsepower: 2 HP
• Airflow Capacity: 105 SCFM
• Inlet Size: 1.5"
• Outlet Size: 1.5"
• Amperage Rating: 11 A
• Phase: Single Phase
• Voltage: 230 V
• Frequency: 50/60 Hz (as listed by supplier)
• Maximum Working Water Pressure: 90 (unit not specified)
• Maximum Vacuum Water Pressure: 82 (unit not specified)
• Overall Length: 16"
• Overall Width: 16"
• Overall Height: 16"
• UNSPSC Code: 40101601

Electrical Compatibility and Installation

This blower is specified for single-phase electrical operation. The supplier lists a 230 V configuration with 50 Hz and 60 Hz notation. Before installation, confirm the required operating voltage, frequency, wiring arrangement, and electrical protection requirements with the supplier or a qualified electrical professional.

Ensure that connected piping, ducting, and system components are compatible with the 1.5-inch inlet and outlet connections.

Performance and Operating Considerations

The supplier lists an airflow capacity of 105 SCFM. Actual operating performance may vary depending on system resistance, installation conditions, and the blower's operating point. Review the applicable performance data to confirm that the blower meets the airflow and pressure requirements of the intended application.

Important Product Information

The supplier lists maximum working water pressure as 90 and maximum vacuum water pressure as 82, but does not specify the units or test conditions. Confirm these details with the supplier before using the values for engineering, equipment selection, or installation decisions.