All Star 3.5 HP Single Phase Regenerative Air Blower, 165 SCFM, 2" Inlet & Outlet

Product Description

The All Star 3.5 HP Single Phase Regenerative Air Blower is designed for industrial air movement applications requiring consistent airflow. With a supplier-listed airflow capacity of 165 SCFM and 2-inch inlet and outlet connections, this unit is designed for integration into compatible industrial air handling and distribution systems.

Powered by a 3.5 HP single-phase motor, the blower has a listed amperage rating of 21.6 A. The supplier specifies electrical configurations for both 50 Hz and 60 Hz power systems. Its overall dimensions are 24 inches in length, 24 inches in width, and 23 inches in height.

Key Features

• 3.5 HP single-phase motor
• Supplier-listed airflow capacity of 165 SCFM
• 2-inch inlet and outlet connections
• 21.6 A listed amperage rating
• 50 Hz and 60 Hz voltage configurations
• Maximum working water pressure listed as 155.00
• Maximum vacuum water pressure listed as 155.00
• UNSPSC classification: 40101601

Specifications

• Product Type: Regenerative Air Blower
• Horsepower: 3.5 HP
• Airflow: 165 SCFM
• Inlet Size: 2 inches
• Outlet Size: 2 inches
• Phase: Single Phase
• Amperage: 21.6 A
• Voltage: 220V at 50 Hz; 230V at 60 Hz
• Maximum Working Water Pressure: 155.00 (unit not specified by supplier)
• Maximum Vacuum Water Pressure: 155.00 (unit not specified by supplier)
• Overall Length: 24 inches
• Overall Width: 24 inches
• Overall Height: 23 inches
• UNSPSC Code: 40101601

Electrical Compatibility and Installation

This blower is specified for single-phase electrical systems. The supplier lists 220V at 50 Hz and 230V at 60 Hz. Verify the available supply voltage, frequency, amperage requirements, motor protection, wiring, and installation conditions before connecting the equipment. Electrical installation should be completed by a qualified professional.

Allow sufficient installation clearance for the unit's 24-inch length, 24-inch width, and 23-inch height. Confirm that connected ductwork and fittings are compatible with the 2-inch inlet and outlet connections.

Performance and Operating Considerations

The supplier lists an airflow capacity of 165 SCFM. Actual operating performance may vary depending on system resistance, installation conditions, and the operating point. Review the manufacturer's performance curve and operating limits before selecting the blower for a specific application.

Important Product Information

The maximum working water pressure and maximum vacuum water pressure are reproduced as supplied. Units of measurement were not specified in the product data. Confirm these values and the applicable operating conditions with the supplier before using them for engineering or equipment selection.